| Teknik Özellikler / Technical Data Sheet | |||
|---|---|---|---|
| Product Code | Medamid 100 | ||
| Product Description | Polyamide 6 (PA6) UNR | ||
| PRODUCT CHARACTERISTICS | |||
| Processing Method | Suitable for injection molding | ||
|
Tipik Özellikler* / Typical Properties* |
Birim / Unit | Test Metodu / Method | Değer / Value |
| GENERAL / GENEL | |||
| Density / YOĞUNLUK | Gr/cm3 | ISO 1183 | 1,10–1,16 |
| Viscosity / VİZKOZİTE | ASTM D445 | – | |
|
Ash Content (750 °C/30 min.) / KATKI ORANI |
% | ISO 3451 | 0,78 |
| MECHANICAL / MEKANİK | |||
|
TENSILE STRENGTH / ÇEKME MUKAVEMETİ |
Mpa | ISO 527 | 65–70 |
|
TENSILE STRAIN AT BREAK / KOPMADAKİ UZAMA |
% | ISO 527 | 13–15 |
|
TENSILE MODULUS / ELASTİKİYET MODÜLÜ |
Mpa | ISO 527 | 2000–3000 |
|
NOTCHED IMPACT STRENGTH (IZOD) / İZOD ÇEKİNTİLİ DARBE MUKAVEMETİ |
kj/m2 | ISO 180/A | 6,0–8,0 |
| THERMAL / TERMAL | |||
|
Melting Temperature / ERİME SICAKLIĞI |
°C | ISO 3146 | 250 |
| PROCESSING CONDITIONS | |||
|
Drying Temperature / KURUTMA SICAKLIĞI |
°C | 80–90 | |
| Drying Time / KURUTMA SÜRESİ | Hour | 2–4 | |
|
Processing Temperature / İŞLEME SICAKLIĞI |
°C | 245–255 | |
* Mechanical properties measured at 23°C (73°F) unless otherwise stated.
* The above values are typical of samples molded and tested in laboratory conditions.
The actual values may vary depending on the processing
conditions and end use.
* Mechanical properties measured at 23°C (73°F) unless otherwise stated.
* The above values are typical of samples molded and tested in laboratory conditions. The actual values may vary depending on the processing conditions and end use.